- The referenced blueprint is 100 questions across four hours, open book, per the Volusia County EAE1V sheet.
- General Theory and Chapter 4 are tied as the largest blueprint sections at 16% each.
- GITS lists $120 for a four-hour Florida exam, plus separate test-site or proctor fees.
- Your county's current Exam Information Sheet (EIS) - not this cheat sheet - controls actual scope and approved references.
What This Cheat Sheet Covers
This is a one-page-style review for candidates preparing for the GITS Master Electrician and Electrical Contractor Examination - the jurisdiction-specific licensing exam administered by Global Independent Testing Service (GITS), formerly known as Gainesville Independent Testing Service, on behalf of participating Florida licensing boards. GITS exams aren't a single national test with fixed content; they're county- and category-specific, which means the exact blueprint, duration, and reference list you'll see on test day depends on which county and license category you're sitting for.
The most detailed public example available is the May 2014 Volusia County EAE1V Unlimited Master Electrical Contractor Exam Information Sheet, and it's the reference point used throughout this cheat sheet and in our companion breakdown at GITS ME/EC Exam Domains 2026: Complete Guide to All 11 Content Areas. Treat the numbers below as a study framework, not a guarantee - your county's current sheet always overrides anything printed here.
Quick Facts Table
Here's the condensed version of the publicly available blueprint and pricing data, useful as a printable reference alongside your notes.
| Item | Detail |
|---|---|
| Reference blueprint | May 2014 Volusia County EAE1V Unlimited Master Electrical Contractor sheet |
| Question count | 100 questions |
| Time limit | 4 hours |
| Book policy | Open book |
| Base exam fee | $120 for a four-hour Florida exam |
| Additional costs | Test-site or contracted-proctor charges, billed separately |
| Largest domains | General Theory and Chapter 4, 16% each |
| Who sets pass standards | Local licensing boards, not GITS |
For a deeper walkthrough of these figures, see GITS ME/EC Certification Cost 2026: Complete Pricing Breakdown and GITS ME/EC Passing Score 2026: Exactly What You Need to Pass.
The 11 Domains at a Glance
The Volusia County EAE1V blueprint breaks the exam into eleven scored content areas. Memorizing the relative weight of each one helps you allocate study hours proportionally instead of spreading effort evenly across topics that don't carry equal exam impact.
Domain 1: General Theory - 16%
Foundational electrical theory questions that touch calculations, circuit fundamentals, and applied concepts used throughout the rest of the exam.
- Joint-largest domain on the blueprint
Domain 2: Chapter 1 - 10%
Code-based questions tied to the first chapter of your approved reference material.
Domain 3: Chapter 2 - 8%
Mid-weight content area; still worth dedicated review time but not a top scheduling priority.
Domain 4: Chapter 3 - 12%
One of the heavier chapter-based sections, second only to the two 16% domains.
Domain 5: Chapter 4 - 16%
Tied with General Theory as the largest single content area on the blueprint.
- Joint-largest domain on the blueprint
Domain 6: Chapter 5 - 6%
Smaller weight; useful for quick review passes rather than deep study blocks.
Domain 7: Chapter 6 - 8%
Moderate weight, comparable to Chapter 2.
Domain 8: Chapter 7 - 4%
One of the lowest-weighted domains on the blueprint.
Domain 9: Chapter 8 - 4%
Tied for lowest weight; still worth knowing since every question counts toward the 100-question total.
Domain 10: Chapter 9 - 6%
Same weight tier as Chapter 5.
Domain 11: Safety - 10%
A standalone safety-focused section, weighted the same as Chapter 1.
For a full walkthrough of what each domain actually tests conceptually, our dedicated guide at GITS ME/EC Exam Domains 2026: Complete Guide to All 11 Content Areas goes further than this summary allows.
High-Weight Domains to Prioritize
Since General Theory and Chapter 4 are the joint-largest sections at 16% each, they deserve the first and most repeated blocks of your study calendar. Combined, these two domains alone represent roughly a third of the blueprint's weight. Chapter 3 at 12% is the next tier down and shouldn't be neglected just because it's not tied for first.
Key Takeaway
Spend your first study sessions on General Theory and Chapter 4 - together they carry the same weight as three or four of the smaller domains combined.
On the opposite end, Chapter 7 and Chapter 8 sit at 4% each. That doesn't mean skip them entirely - with 100 scored questions, even a 4% domain represents several questions - but it does mean they should get lighter review passes rather than the bulk of your calendar. If you're unsure how this weighting translates into real difficulty on test day, our analysis at How Hard Is the GITS ME/EC Exam? Complete Difficulty Guide 2026 breaks down where candidates typically lose the most time.
Format, Fees, and Registration Mechanics
Two numbers matter most for planning: 100 questions and four hours. That works out to a manageable pace if you know your material, but the open-book format can eat clock time if you haven't pre-tabbed your references. Budget your four hours knowing you'll need time to look things up, not just answer from memory.
On cost, GITS currently lists $120 for a four-hour Florida exam. That figure does not include test-site or contracted-proctor charges, which are billed separately and can vary depending on where and how you sit for the exam. Before you register, confirm the total out-of-pocket cost with your test site directly - the $120 base fee is not the full picture. A complete cost breakdown, including how these separate charges typically stack up, is covered in GITS ME/EC Certification Cost 2026: Complete Pricing Breakdown.
Eligibility requirements, license validity periods, and renewal timelines are not set by GITS - they're determined by your local licensing board. That means two candidates in different counties could face different prerequisites even though they're both sitting for a GITS-administered exam. Check your specific requirements before you schedule anything; our guide at GITS ME/EC Requirements 2026: Eligibility, Prerequisites & How to Qualify walks through how to find your board's current rules.
Open-Book Reality Check
Open book does not mean easy. With 100 questions and four hours, you have roughly 2.4 minutes per question if you split time evenly - and that's before accounting for reading time in your reference materials. Candidates who treat "open book" as a reason to skip studying often run out of time before finishing the exam.
The practical approach: know your material well enough that you're using the book to confirm answers and pull exact code language, not to learn concepts from scratch during the test. Tab your approved references by chapter number so they line up with the domain names above - Chapter 1 through Chapter 9, plus General Theory and Safety. This alignment makes it much faster to jump straight to the section a question is testing.
If you want a structured walkthrough of exactly how to prepare rather than just what to expect, our full guide at GITS ME/EC Study Guide 2026: How to Pass on Your First Attempt covers reference tabbing, practice strategy, and pacing in more depth than this cheat sheet.
A Final-Week Review Plan
If you're in the last stretch before test day, allocate your remaining review time by domain weight rather than by chapter order. Here's a compressed schedule built around the blueprint's actual percentages.
General Theory & Chapter 4 (32% combined)
- Review core calculations and applied theory questions
- Tab and cross-reference Chapter 4 material in your approved book
Chapter 3 (12%) and Safety (10%)
- Work through Chapter 3 practice scenarios
- Review safety procedures and terminology likely to appear as standalone questions
Chapter 1 (10%), Chapter 2 (8%), Chapter 6 (8%)
- Mid-weight domains get a focused but shorter block each
Chapter 5 (6%), Chapter 9 (6%), Chapter 7 (4%), Chapter 8 (4%)
- Light review pass on lower-weighted domains
- Confirm your reference edition matches the current EIS requirement
Full timed practice
- Simulate the four-hour, 100-question format under open-book conditions
- Practice pacing with your actual tabbed references
Run practice questions under real time pressure at our GITS ME/EC practice test platform so the pacing on test day doesn't come as a surprise.
Who This Credential Is For
The GITS Master Electrician and Electrical Contractor Examination exists because certain Florida county and category licensing boards use GITS as their testing administrator rather than running exams in-house. Passing this exam is a step toward the unlimited master electrical contractor license category in a given jurisdiction - the license itself, and what it lets you legally do, is defined by your local board, not by GITS.
If you're weighing whether pursuing this license path makes sense for your career, our analysis at Is the GITS ME/EC Certification Worth It? Complete ROI Analysis 2026 looks at the return on the time and fees involved. And if you're researching how this credential connects to job opportunities in the field, related reading is available on our site covering general career context for licensed electrical contractors.
Because the exam is jurisdiction-specific, it's worth double-checking your own eligibility path before registering - prerequisites, license validity, and renewal cycles differ by board, which is covered in more detail at GITS ME/EC Requirements 2026: Eligibility, Prerequisites & How to Qualify.
Key Takeaway
This exam is a testing step controlled by GITS; the license itself, its scope, and its renewal terms are controlled by your local Florida licensing board.
Frequently Asked Questions
The publicly available Volusia County EAE1V Unlimited Master Electrical Contractor sheet lists 100 questions over a four-hour, open-book format. Always confirm this against your county's current Exam Information Sheet, since it controls the actual scope and duration for your specific exam.
Current GITS pricing lists $120 for a four-hour Florida exam. Test-site or contracted-proctor charges are additional and billed separately, so your total cost will be higher than the base fee. See our full breakdown at GITS ME/EC Certification Cost 2026: Complete Pricing Breakdown.
General Theory and Chapter 4 are the joint-largest blueprint areas, each weighted at 16%. Chapter 3 follows at 12%, making these three domains your highest-priority study areas.
No. GITS administers jurisdiction-specific exams, and the county/category Exam Information Sheet controls the current scope, duration, topic areas, and approved references for your specific exam code. Verify your exact county and category before studying.
Local licensing boards set eligibility, passing standards, license validity, and renewal - not GITS. For specifics, see GITS ME/EC Passing Score 2026: Exactly What You Need to Pass and practice under realistic conditions at our practice test platform before scheduling your exam.